Home >> Cheap wholesale HSDJET Plane >>HSD Jets J-10 8kg Turbine Foam Jet PNP smoke turbine Black/Red & White RC AIRPLANE
HSD J-10 8kg Turbine Foam PNP smoke turbine Black/Red & White Jet
HSD J-10 8kg Turbine Foam PNP smoke turbine Black/Red & White Jet
Special price: [ US$1555.00 ]
Shipping Cost: [ US$220.00 ]
Ship to:
Estimated Delivery: 3 to 7 business days
HSD Jets J-10 8kg Turbine Foam Jet PNP smoke turbine Black/Red & White RC AIRPLANE
1.It requires Turbine Engine
2.it requires 10+ Channel 2.4 GHz Radio,10+ Channel 2.4 GHz Receiver
3.it requires 2S,7.4V,3200mAh×2,LiPo with XT60 type plus Li-Po Battery
HSD Jets J-10 8kg Turbine Foam Jet PNP smoke turbine Black/Red & White RC AIRPLANE Specifications:
This Products is available in stock.
This Products is available in stock.
This Products is available in stock.
we will ship the package within 48 hours after the buyers pay momey by paypal
it is made in China HSD JET ,100% original,
This is the new J-10 from HSD Jetsit is Suitable for 8 to 12kg turbines and anything in-between based on the Chengdu J-10 Vigorous Dragon NATO reporting name: Firebird, is a medium-weight, single-engine, multirole combat aircraft capable of all-weather operations, configured with a delta wing and canard design,[7] with fly-by-wire flight controls, and produced by the Chengdu Aircraft Corporation (CAC) for the People's Liberation Army Air Force (PLAAF), Pakistan Air Force (PAF) and People's Liberation Army Naval Air Force (PLANAF). The J-10 is mainly designed for air-to-air combat, but can also perform strike missions.
Features
Tough and resilient 20 times EPO airframe.
Crisp and clean airframe mouldings.
Includes MFC-2085 Pro multi-function flight controller.
Pre-programmed switchable gyro (included in MFC-2085 Pro).
Minimal assembly time.
Wing-mounted connector blocks for aileron, flap and light wiring.
Scale all-moving canards.
Pre-finished (painted and decorated) airframe components.
Pre-painted pilot and cockpit detail.
Pre-installed jet pipe.
Pre-installed fuel system.
Pre-fitted UAT.
Pre-fitted smoke system.
Fully equipped with LED navigation and landing lights.
Main wheels equipped with electromagnetic braking.
High strength, 4-point, metal, dual control horns.
Industry leading packaging, aids storage and prevents transport damage.
What's in the Box
1x Pre-painted and finished EPO fuselage moulding.
1x Pre-painted and finished EPO wing set.
1x Pre-painted and finished EPO canard set.
1x Pre-painted and finished EPO fin and rudder.
1x Pre-painted and finished FRP air intake moulding.
1x Pre-installed, all metal, oleo style electric retracts with brakes.
1x Pre-installed aluminium wheel set with durable rubber tyres.
1x Pre-installed fuel system with UAT.
1x Pre-installed smoke system.
1x Pre-installed jet pipe.
1x Wing and canard spar set.
9x Pre-installed metal gear digital servos.
1x Pre-fitted LED navigation and landing light system.
1x Pre-installed MFC-2085 Pro Multi-function flight controller.
1x Hardware pack.
1x Comprehensive instruction manual.
1x Comprehensive MFC instruction manual.
Required to Complete
1x 11-channel transmitter and receiver combo.
1x 8 – 12kg turbine.
2x 2S 7.4V 2200 to 3700mAh LiPo with XT60 connector.
1x 2S 7.4V LiPo as directed by engine manufacturer.
SPECIFICATIONS:
| Wingspan | 1300 mm (51.2 in) |
| Length | 2115 mm (83.3 in) |
| Weight | --- |
| Turbine Engine | 8KG～12KG (required & not included) |
| Cruising speed | --- |
| Flying time | --- |
| Wing area | 64 dm2 |
| Wing load | --- |
| Main material | 20 times EPO |
| Painting surface | Matte environmental water-borne paint + decal |
| Suitable experience level | Advanced |
| KIT Assembly difficulty | □☆10mins □★☆30mins ■★★60mins (For reference only) |
| Suitable for ambient temperature | 0℃～40℃ |
| Radio System | 10 channel (required & not included) |
| Control System | MFC-2085 (required & not included) |
| Servos(required & not included) | 7.4V 40g×1 Metal gear with 450mm lead (Canard wing forward) |
| Recommended Battery | 2S,7.4V,3200mAh×2,LiPo with XT60 type plug(required & not included) |
| Ailerons | Yes |
| Canard wing | Yes |
| Elevator | Yes |
| Rudder(Vertical tail) | Yes |
| The smoke system | Selective configuration (not included) |
| LED lights system | Selective configuration (not included) |
| Electromagnetic brake system | Selective configuration (not included) |
| Vectoring nozzle | Selective configuration (not included) |
| Reinforced gyro | Selective configuration (not included) |
| Packaging / Size | Packing Box + Outer Box(Card mark)/60×21.3×14.8(inch) |
| CG (Center of Gravity) | 238～242 mm from the leading edge of the Main Wing |
| Landing Gears | Metal electric retractable hydraulic landing gear×3 (required & not included) |
| Battery Charger | LiPo battery charger (required & not included) |
PACKAGE INCLUDES:
- Fuselage×1 pcs
- Left main wing×1 pcs
- Right main wing×1 pcs
- Nose×1 pcs
- Cockpit×1 pcs
- Vertical tail×1 pcs
- L&R Canard wing×1 pcs
- Air inlet×1 pcs
- Caudal fin×1 pcs
- 1# Main wing carbon tube L=520mm external diameter 16mm×1 pcs
- 2# Main wing carbon tube L=540mm external diameter 10mm×1 pcs
- Accessories Bag 1 ×1 pcs
- Screw (HA3×10mm)×6 pcs (Horizontal tail)
- Screw (HM3×65mm)×2 pcs (Wing)
- Screw (HM4×45mm)×4 pcs (Wing)
- Screw (HM3×6mm)×4 pcs (Vertical tail / Nose)
- Accessories Bag 2 ×1 pcs
- 100mm signal line(JR male+JR male) ×8 pcs
- Accessories Bag 3 ×1 pcs
- Filler tube ×1 pcs
- Left and right pitot tubes ×2 pcs
- Nose radar antenna ×1 pcs
- Upper and lower fuselage antenna ×2 pcs
- Remove the ribbon before flight ×1 pcs
- Oil tank overflow vent plug ×1 pcs
- Manual×1 pcs
REQUIRES:
- 8KG～12KG turbine engine (required & not included)
- 10 channel radio system(radio & receiver) (required & not included)
- 2S,7.4V,3200mAh×2,LiPo with XT60 type plug(required & not included)
- LiPo battery charger (required & not included)
- Servos
7.4V 40g×1 Metal gear with 450mm lead (Canard wing forward)
7.4V 25g×2 Metal gear with 80mm lead (Left & right ailerons forward)
7.4V 25g×2 Metal gear with 80mm lead (Elevator×2 forward)
7.4V 25g×1 Metal gear with 80mm lead (Rudder×1 forward)
7.4V 25g×2 Metal gear with 80mm lead (Vectoring nozzle×2 forward)
7.4V 12g×1 Metal gear with 500mm lead with protection function (Front wheel cover plate forward)
7.4V 12g×3 Metal gear with 500mm lead with protection function (Front wheel steering / Rear wheel cover plate forward) - Metal electric retractable hydraulic landing gear×3 (required & not included)
